Security Gates for Doors and Alleyways – Suppliers and Installers

BALMORAL PEDESTRIAN ONLY ALLEYGATE
2.1 Metres High Overall
	Designed as a Modular system with full adjustability - discard unused items Will fit any width of opening from 950 mm up to 5380 mm The vertical palings can be spaced out to suit your particular requirements Tried and tested by the Metropolitan Police since 1995 Simple to stock for Multiple Pedestrian Gate schemes as only need to keep a) the Standard Gate complete with frame and b) the Standard side panels Gate is a fixed width of 950 mm including side posts Add ONE of the universal side panels to the Standard Gate, and now you can gate off an opening, up to and including 2240 mm wide Add a SECOND universal side panel onto the other side of the Gate, and you can now gate off an opening from 2750 mm right up to 5380 mm. Pedestrian Gate from £223 + VAT; overall price only £116 per metre run An effective fence spike on top of Alleygate without being too aggressive Electro galvanised and plastic coated finish for low maintenance and long life Overall a very flexible and cost effective Pedestrian Gate

VICTORIAN PEDESTRIAN & VEHICLE ALLEYGATE
2.4 Metres High Overall
	Heavier duty gate but still aesthetically pleasing Double Vehicle Gates from 2800 mm up to 3800 mm Single Pedestrian Gates up to 1350 mm wide Made to Measure product to fit the opening exactly Adjustable hinges for easy maintenance Euro Profile lock for Master Key systems Pedestrian Gate from £441; Vehicle Gate from £704; overall £408 per metre run A plastic but realistic Fleur De Lys spike on top of the Alleygate Fully Hot Dipped Galvanised to prevent rust, with plastic coated finish Overall a substantial high security system and very aesthetically pleasing


DETAILED INFORMATION FOR BOTH SYSTEMS

BALMORAL PEDESTRIAN ONLY ALLEYGATE

PRICES The above are supply only prices excluding VAT and delivery. They come complete with the Lockcase and Euro Profile Cylinder.

VICTORIAN PEDESTRIAN & VEHICLE ALLEYGATE

PRICES The above prices are supply only prices excluding VAT, Lockcase, Euro Profile Cylinder and Delivery.

WHAT LOCKCASE IS REQUIRED
The gate is designed for an Adams Rite MS2200 Lockcase which we can supply for £30 + VAT. This is a maximum security deadlock. This lockcase requires a key cylinder to lock and unlock the gate and fits perfectly within the design of the gate without providing a climbing point.

WHAT LOCK CYLINDER IS REQUIRED
A Euro Profile lock cylinder is used in conjunction with the Lockcase to be able to operate the gate using a key. A standard cylinder can be purchased from a Locksmith from around £20. However, anybody can have a key cut from it which means that you immediately and permanently lose the integrity of the scheme. So to prevent this happening you can use an EVVA cylinder System which although more expensive, is a Master Key locking system, which means that keys can only be cut IF you are the authorised user. This is the only way that you can keep control and the integrity of the Alleygates. However, other Master Key locking systems are available, just talk to your Local Maser Locksmith who will be able to advise and support you as well as operate the key cutting system with you.


GENERAL INFORMATION ON BOTH SYSTEMS

DELIVERY COSTS
Normally we charge £35 + VAT for one or several gates. Larger quantities may be charged at a higher rate.

GATE DESIGN
This is very important to prevent your Gates being compromised having spent a lot of money having them installed. Many local fabricators will be able to make you a gate, but they do not necessarily undrstand how thieves work and how they can attack gates to break through them. We a re a Licensed Secured by Design company working with the Police and Insurance Companies and have been in the Physical Security business for nearly 20 years, so we make sure that our Gate Designs are as secure and impenetrable as they can be. So buying one of our gates can give you the confidence that your Gates will work as well as they can for you and your Scheme, making sure that you spend your money wisely.


IMPORTANT FEATURES OF AN ALLEYGATE
Any Steel product will rust if not Galvanised. Once Steel starts to rust it is extremely difficult if not impossible to stop, hence the appearance of both the Gate and the Local Area will be affected. The Balmoral Alleygate is Electro-Galvanised after manufacture. The Victorian Alleygate is Hot Dipped Galvanised after manufacture - an expensive process but necessary for steel fitted externally. They are then Epoxy powder coated to provide a more durable finish to powder coating, to look good for years to come, as well as keeping the area looking smart. The other important feature of an Alleygate is to eliminate any climbing points hence our Lockcase is built into the frame of the gate, and we use vertical bars without cross members. The Victorian Alleygate has fully adjustable hinges for ease of Maintenance.

HEIGHT OF AN ALLEYGATE
We would normally recommend a height of 2.3 to 2.4 metres overall to help prevent anybody climbing over an Alleygate. This is the height of the Victorian Alleygate. However, if your Local Council want it reducing in height, then we can make it to any height, for no extra cost. The Balmoral Alleygate fitted for the Metropolitan Police in London from 1995 onwards, was specified by the Council as 2100 mm overall height to the top of the spikes. This height has remained.

HOW CAN DECOR-GRILLE SECURITY HELP YOU WITH YOUR SCHEME
If your not sure where to start in setting up an Alleygate Scheme then contact our Alleygate Co-oridinator, Stuart Yeo, who should be able to point you in the right direction. If on the other hand you have got to the stage where you are looking to buy the Hardware then in the first instance take some digital pictures of each opening together with some measurements and email them Stuart Yeo at info@dgsecurity.co.uk We will then be able to advise you and offer a Quotation for your particular requirements. We can also offer advice on installation of the gates and a price for installation if you do not have somebody locally who can install them for you. Prior to manufacture we will carry out a full site survey and iron out any problems that you may have then.