Fence Spike, Roof Security, Wall Spike, Anti Climb Spike

Anti Climb Spikes are a much better solution than Razor Wire for flat roof security & roof edge protection. Razor Spike actually stops people climbing onto low level flat roofs. Razor spikes provides a real solution for Fence Spike, Wall Spike, Roof Security and the subsequent vandalism damage that can costs thousands to repair.
Yes Barb Razor Anti Climb Spikes are legal and Insurance Approved.

ANTI CLIMB SPIKES - FENCE SPIKE - ROOF SPIKE

PREVENTING DAMAGE TO FLAT ROOFS
AND CLIMBING OVER FENCES AND WALLS

The Problem

•	Drain pipes and the like make it easy for agile youngsters to climb up onto flat roofs.
•	PC99 Anti-Climb Paint works for several weeks but gets washed off after many weeks of weathering
•	Flat roofs are ideal places to skate board but roof felt rips very easily and can cost thousands of pounds to repair
•	Conventional roof spikes and razor wire are ineffective – a blanket placed over them makes it easy to climb over
•	Conventional roof spikes and razor wire can make the building look like an army camp or industrial unit

BARB SPIKE 11 - Fence Spike - Roof Security - Wall Spike - Anti Climb Spike

The Solution – PS11 Barb Razor Spike
•	Probably the most robust and effective Anti Climb Spikes of its type
•	It has a very neat, attractive profile
•	Very competitively priced
•	Perfectly Legal if fitted correctly

The Security Solution Specialist

WALL SPIKE & FENCE SPIKE

Secured By Design Approved Product - BARB SPIKE 11 - Fence Spike - Roof Security - Wall Spike - Anti Climb Spike

PS11 SPIKE

Barbed Razor Spike

WARNING SIGN FOR BARB SPIKE 11 - Fence Spike - Roof Security - Wall Spike - Anti Climb Spike

PRODUCT BASICS
•	PS11 Fence Spike and Wall Spike are both Insurance Approved and Police Approved
•	Its neat attractive profile makes it ideal for use on buildings where appearance is as important as effectiveness i.e public buildings, embassies as well as Schools and Local Authorities.
•	PS11 Anti Climb Spikes are manufactured in 1 Length only - 1500 mms (1.5 metres)
•	PS11 Spike is boxed as 15 Lengths of 1500 mms – making a TOTAL of 22.5 metres per box.
•	We only have one height of PS11 Spike, which is 110 mms in height.
•	Each length is fully hot dipped galvanized to prevent rust and designed for external use.
•	PS11 Spike is an IN STOCK product and available for delivery within a few working days
•	95% of PS11 Spike is supplied with only a Galvanised finish. However we can powder coat which helps the product blend in to the surroundings a) at an additional cost and b) minimum order 30 metres.
•	PS11 Spike is also available for higher security applications. Because PS11 Spike is so effective in its standard form, we very rarely use our Rotary Spike. However it is available if required.

SECURITY LEVEL:

PRICE:

HIGH

SPECIAL OFFER PACK

�445 excluding VAT per box

Normal Price £530 + VAT

Weighs 30.45 Kgs per box

Generally available ex-stock

PACK COMPLETE WITH:

EXTRAS AVAILABLE :

Reinforced Cardboard Box
15 x 1.5 metre Lengths of Razor-Spike
4 x A4 Safety Signs
All finished in Silver Galvanised

80 off 70 mm Security Screws

1 Security head driver

3 mm Pilot Drill

FREE Delivery

Powder Coating £2.85 per metre inc VAT.
Most BS & RAL colours available.

Wall Brackets from £12.81 + VAT each.

Extra signs £3.75 + VAT each.

A. FLAT & PITCHED ROOF APPLICATION - Roof Spike

1) PREVIOUS SOLUTION – DID NOT WORK

Due to previous Flat Roof damage from vandalism, the School brought in a Local company who could only off Razor Wire. Not only did it look like an “Army Camp” rather than a School, but it did not work. Coats were simply placed over the top of the Razor Wire and they could walk over it. Having spent �000’s it did not work.

2) PS11 SPIKE SOLUTION – DID WORK

We were brought in by the Local Crime Reduction Officer to find a Solution. We removed the Razor Wire and Brackets. Our PS11 Spike was attached to new “cranked” wall mounted brackets, providing a much neater result. In the 3 years it has now been fitted, NOBODY has got onto the roof – providing a very effective Solution for the School and, no more roof repairs as a result of Vandalism.

�

B. FENCING APPLICATIONS - Fence Spike

1) PREVIOUS SOLUTION – DID NOT WORK

A good quality fence had been fitted at this School, yet climbing over the fence appeared easy. To try to remedy this a Local company fitted brackets and Razor Wire all around the School – what a sight!! What a poor environment for Children to work in. After spending �000’s the School realised that it had not worked – thieves were still scaling the fence, but with a pair of tin snips were able to cut a section of the Razor Wire out and then get over the fence. At great expense the solution did not work.

2) PS11 SPIKE SOLUTION – DID WORK

The School called us in to find a solution being a Secured by Design company. We removed the Razor Wire and brackets. We attached Steel Angle between the posts and attached our PS11 Spike to it – a much neater result. In over two and a half years since our PS11 Spike has been fitted, nobody has even tried to climb over it – proving how effective the product is for the School.

FITTING INFORMATION
•	To comply with the requirements of the Secured by Design License and the Owner’s Liability Act of 1984, PS11 Barb Razor Spike Anti Climb Spikes must be fitted a MINIMUM of 2 metres above the ground.
•	Schools and Educational establishments – a MINIMUM height of 2.3 metres, and ideally 2.4 metres
•	It is extremely important that our PS11 Spike is only attached to a Rigid Structure. If no rigid structure is available, then something like 50 mm x 50 mm angle may need to be fitted, prior to securing the PS11 Spike to it.
•	Warning signs MUST be fitted just below the spike, and at a minimum of 6 metre intervals, and at least 1 per face.
•	PS11 must be placed on the leading edge i.e the side that the person will approach from. If it is not visible it is regarded as an entrapment.
•	When handling Fence Spike or Wall Spike care must be taken concerning the sharp edges. It must never be balanced on an edge but be held in position for fixing.
•	Fixing PS11 Spike requires the right screws, bolts, nuts etc, determined by the substrate that the Anti Climb Spikes are being attached to. It is essential that the Spike is firmly and securely fixed to its substrate.

FENCE SPIKE - EXAMPLES

PITCHED - ROOF SPIKE - EXAMPLES

FLAT - ROOF SPIKE - EXAMPLES

BARBED SPIKE 11 PRICE STRUCTURE		WHAT DO YOU GET WITH EACH DELIVERY
•	The Selling price for this product is �23.44 + VAT per metre OR �35.16 per 1500 mm length. (the standard length we manufacture it in)	•	With 1 or more lengths of PS11 Spike we will provide the following:
•	The price of Rotary PS11R Spike, is �53.41 + VAT per metre OR �80.11 per 1500 mm standard length.	•	Signs – the number will be determined by at least one per 6 metres of spike AND a minimum of 1 per elevation – A4 Size – they cost �3.75 + VAT each
•	This product is only available in multiples of 1500 mms (1.5 metres).	•	Copy of Generic Method Statement
•	The minimum order value is a) Fixed Spike – 22.5 metres – a full box of 15 Lengths of 1.5 Metres each b) Rotary Spike – 9 metres – 6 Lengths of 1.5 metres.	•	Blank copy of Risk Assessment Sheet
•		•	Reinforced Cardboard Box
•		•	Each box of PS11 Spike weighs 30.45 Kgs

COLOUR OPTIONS		FIXINGS FOR STATIC SPIKE
•	We can powder coat to any RAL or BS Colour. The retail price is �3 + VAT per metre . The Dark Green RAL 6005 and Black are the most popular colours. Minimum order is �90 OR 30 metres of Barb Spike 11. This could extend delivery by up to 2 weeks.	•	We can supply 6 mm x 70 mm long torque headed screws if these are suitable. These can be supplied at a Retail price of �80 + VAT per 1000. MINIMUM quantity 1000.

INSTALLATION
We include a Generic Risk Assessment, Method Statement and a Blank Risk Assessment form in each product Pack. Further copies of these can be downloaded and printed off our website. PRIOR TO INSTALLATION it is paramount that you carry out a SPECIFIC Site Risk Assessment and follow carefully the Method Statement provided. We can offer an Installation Service nationally if required. Ring us on 0113 248 4747.
This product can be dangerous if not handled or fitted correctly. Health and Safety is extremely important.

•	PS11 Spike comes in lengths of 1.5 metres. So when providing a rigid substrate to attach the PS11 too, bear this length in mind.
•	It is important that PS11 Spike is screwed, bolted or riveted securely every 300 mms
•	PS11 Spike MUST only be fitted to a rigid structure.
•	Security fixings are ideal. If not available, it is acceptable to either drill out the heads of the fixings OR fill them with suitable Sealant or Resin.
•	A Flat Roof usually provides that rigid structure which enables each length of PS11 Spike to be secured correctly straight onto it. A Silicone bed is usually placed underneath the length of PS11 Spike and into the drilled holes to make a good seal with the roof.
•	If fitting the PS11 Spike to the top of Fencing then something like 50 mm x 50 mm angle needs to be firmly secured to the fencing posts at each end to provide that rigid structure that enables the PS11 Spike to be fitted directly on to it.
•	If fitting PS11 Spike to a Pitched Roof then a series of Cranked Brackets will be required with angle or some rigid bar, tube or angle between. 50 mm x 50 mm Angle can be used as per fencing. The PS11 Spike can then be fitted directly on to it.

ROTARY SPIKE - PS11R
for High Risk Applications

Rotary BARB SPIKE fitted onto Palisade Fencing

Rotary BARB SPIKE fitted to the top of fencing.

ROTARY SPIKE - Fence Spike or Wall Spike or Roof Security
•	If for high security applications it is felt that a Rotary Spike system (basically 2 pieces of Standard Spike attached to a 25 mm diameter tube that rotates freely at each end.
•	Comes in Pack size of 9 metres, which includes the following:
•	12 – Lengths of special Rotary Spike
•	6 - 1.5 Metre length of Rotary Poles
•	ALL nuts, bolts and washers necessary to make up the system
•	PLEASE NOTE: Unless you provide your own fixing brackets, you will also need to purchase some of our standard Rotary Angle Brackets to attach the Rotary Spike to straight runs of wall surface at a Retail price of �12 + VAT each, usually fitted every 1.5 metres.

BRACKETS & FIXING SUPPORTS
•	We usually stock THREE types of Rotary Brackets.
•	Item 1 – is the Standard Rotary Spike Wall Bracket for attaching each end of the 1.5 metre rotary Pole to a wall or other suitable substrate. These cost £12.81 + VAT each.
•	Item 2 – is our Standard Gutter Bracket is for a Pitched Roof to allow the PS11 Spike to be fitted over a gutter when the fixing is to the side wall and not directly onto the roof. You would then have to provide a rigid substrate between the brackets to be able to correctly fit the Barb Spike 11 to it. These cost £12.81 + VAT each.
•	Item 3 - is our Standard Palisade Fencing Bracket is for Palisade Fencing to allow the PS11 Spike to be fitted to the top horizontal Palisade Bar. The bracket is designed to bring the Rotary Spike above the Palisade Pailings. These cost £12.81 + VAT each.
•	SPECIAL BRACKETS We can manufacture any type of bracket to suit the installation. Please contacts us with your requirement and we can provide a price for manuafcture.